Když budu nahrávat do auta novej soft od Hilton Tuning, který si mám stáhnout z
https://hiltontuning.com/HTVroom_Latest.php
Potřebuji na to nějaký speciální HW, nebo na to stačí normální NTB s OS, na který si nahraju aplikaci a přes OBD II se to spojí
s mým vozem. Doposud jsem se o to nezajímal, nevím jaký konektor ten OBD II adapter má (USB předpokládám? )
Teď mi psali ze servisu, že nemají noťas - respective mají, ale na NTB kde jim běží diagnostika nesmějí nahrávat cizí SW.
Stačí když tam přivezu NTB s nainstalovanou aplikací od Hilton Tuning a oni si tam pak připojí svojí OBD II, nebo je tam
nějaký zádrhel?
Step 1: Download and install this software:
https://hiltontuning.com/HTVroom_Latest.php
Step 2: Connect the DiCE (flashing cable) unit to the computer and the OBD2 port of the car. This is usually located under the driver's side dash on most models. For safety, we also recommend connecting a battery charger to the vehicle that has an output of 20-80 amps at this time.
Step 3: Launch the HTVroom application. You will be asked to enter an App-Key. The App-Key for your order is: ****************
Step 4: Once the App-Key has been entered, you will be asked to select which car you are currently working on. Choose the VIN for the vehicle that you wish to connect to and click OK.
Step 5: Under the File menu, please choose Settings. This will open a window that will allow you to select the DiCE communication tool. Please select this and click OK. You should only need to do this step once if you use the same communication tool each time.
Step 6: Click Connect.
Step 7: Turn the car on to ignition mode (Position 2). For vehicles with keys, this is done by turning the key all the way towards the start position, without actually starting the car. You should see all the lights on the dash. For keyless vehicles, this is done by placing the key in the ignition slot and long holding the start button with your foot off the brake pedal until all the lights turn on on the dash.
Step 8: If this is your first time working with this car, you must perform an initial readout. Please click the Read button and follow the onscreen prompts. The car will appear to have turned off. This is normal during a read or flash operation.
Once this has been completed, please let us know, and we will finalize the tune file and upload it for you to flash to the vehicle.
Thank you,
Rob